IDX HOME

CARWASH HOME

Wickets CASHLESS

  - Wicket Readers

  - Wicket Cards

  - Reader Interfaces

  - Revalue Stations

  - Wickets Administrator

  - Turbo Accessories

TIMERS

X-MARK TOKENS

COIN ACCEPTORS

BILL ACCEPTORS

ZOLAR (AntiFreeze)

ELECTRIC SAFES

SPIKE SNUBBERS

TECH SUPPORT

HOW TO ORDER

CONTACT US

ABOUT IDX

 
Check This Out...

 
Google

 
  IDX   Web
 


Made In U.S.A.

 

 

Wickets PROMOTION

Token PROMOTION

TECH SUPPORT

HOW TO ORDER

ABOUT IDX

CONTACT IDX

 

Scrolling Displays & Timers
Show Them The Numbers, Scroll Helpful Messages !

 

NEW ð

ï NEW

 

Click To Link To A Topic

See PDF Catalog On "How To Order Page" For Complete Listing And Pricing

Timing Accuracy Note All IDX Timers & Display-Timers have quartz crystal timing accuracy of  .05%
  and are therefore guaranteed to have a maximum error of 0.12 seconds over a typical 4 minute wash cycle.

Weights & Measures Sinage Note: All IDX Display-Timers satisfy Department Of Weights & Measures
requirements to scroll both the starting price and the amount of service time that is provided for that price.
 

 


 

 Displays For External Timers


 

LTT800
The LTT800 will track and display coin value deposited and time remaining when attached to most 24VAV external timers. It mounts directly on the door of a meter box and scrolls a changeable welcome introductory message up to 72 characters in length. The letters are 0.75" high, and the  polycarbonate enclosure is 3.8" x 3.4" x 3.1".
 


 

BT800B
The Big Time BT800B will track and display coin value deposited and time remaining when attached to most 24VAV external timers. It also scrolls a changeable welcome introductory message up to 72 characters in length, and accommodates the X-Tra Time function. The letters 2" high by 8" long, and the sealed polycarbonate enclosure is 10" x 7" x 3".
 


 

BT802B
The Big Time BT802B has all of the same features of the above BT800B plus the ability to  properly function with external timers having the Two-Timer function, such as the IDX AT422 vacuum timer or the LTT802 and BT912 display timers as a second slave display. The picture to the right shows the Big Time in the optional BT8 stainless steel enclosure.
 

 Displays With Built-In Timers

 

 

LTT802, LCT802                     LTT802 Brochure    Instructions  
The Little Two Timer model LTT802 displays coin value deposited and displays service time remaining. It mounts directly on the door of a meter box and scrolls a changeable welcome introductory message up to 72 characters in length. The letters are 0.75" high, and the polycarbonate enclosure is 3.8" x 3.4" x 3.1". It has a  4Amp 24VAC output with a short circuit proof option.  It includes the Two-Timer function, programmable BonusTime and X-Tra Time, and a plug for the RC800 or IRM800 remote control programmers. The LCT802 additionally displays elapsed time when enabled by a remote credit card system.
 



 

 

 

BT902, BT912                         BT912 Brochure    Instructions
The Big Two Timer models BT902 and BT912 display coin value deposited and time remaining. They scroll a changeable welcome introductory message up to 72 characters in length with letters 2" high by 8" long. They include the Two-Timer function, programmable BonusTime and X-Tra Time, and a plug for the RC800 or IRM800 remote control programmers. The BT902 comes in a sealed polycarbonate enclosure 10" x 7" x 3" (see BT800B picture above) and has a solid state 4Amp 24VAC output with a short circuit proof option. The BT912 comes in the 12" x 7.4" x 2.5" sealed low profile stainless steel enclosure shown, includes an internally mounted last minute alert horn and has a 5Amp relay output.
 


 

 

 

BT922                        BT922 Brochure    Instructions
The Jumbo Two Timer model BT922 displays coin value deposited and time remaining. It has ULTRA-BRIGHT letters are 2" high and 16" long, and can be ordered in red, yellow or green. It scrolls a changeable welcome introductory message up to 72 characters in length and can optionally scroll the service name during timer countdown. It includes the Two-Timer function, programmable BonusTime and X-Tra Time, and a plug for the RC800 or IRM800 remote control programmers. It comes in the 22" x 7.4" x 2.5" sealed low profile stainless steel enclosure shown, includes an internally mounted last minute alert horn and has a 5Amp relay output.
 

 Dryer / Blower Displays


 

 

BT810B,  DD810,  DD910      BT810 Brochure  
72 character intro message, numerical time countdown, time interrupt message of 36 characters (such as "MOVE UP SLOWLY") and half way message (such as "YOU SHOULD BE HALF WAY THROUGH"). 2" high display, 24VAC power. BT810B is in standard polycarbonate enclosure. DD810 and DD910 come in the 12" x 7.4" x 2.5" sealed low profile stainless steel enclosure shown. DD910 includes remote reset, acceptor disable, 5A relay output.
 

 Multi-Vendor Displays




 

BT912-V,  LTT802-V
The BT912-V and LTT02-V  Multi-Vendor Displays control up to 9 different vending machine product shelf categories. Works with input from product selector switch, displays product name and price, if product selection is empty the coin acceptor is disabled and the display indicates product is empty and to make another selection. BT912-V has coin-in beeper internal to enclosure, timed 5A relay controls dispensing actuator, and it comes in the 12" x 7.4" x 2.5" sealed low profile stainless steel enclosure.  The LTT802-V polycarbonate enclosure is 3.8" x 3.4" x 3.1" for internal meter box mount, and the 4Amp solid state output controls dispensing actuator.
 

 Multi-Message Displays

BS820 Jumbo Scrolling Message Center   BT820 Brochure
The BS820 Jumbo Message Center has 2” high x 16” wide display with eye-popping ULTRA-BRIGHT LEDS that are markedly visible in direct sunlight. The enclosure is 22.25” wide x 7.375” high x 2.50” deep. You can program 9 different 30-character “Service Messages” for display, each being controlled by a separate 24VAC Service Sense input signal. The unit continuously scrolls a programmable “Welcome Message” until a 24VAC signal is present on the external Timer Sense terminal (P1-6). Then it then it scans all 9  24VAC Service Sense terminals (P3-1 to P3-9) and sequentially and repetitively displays the “Service Messages” for each of them that are active.

The BS820 Jumbo Message Center is perfect for use in conjunction with most auto tellers in an automatic carwash to convey pricing or specials information to customers. It can be used as a "Welcome and Information Sign" to promote the services offered to customers waiting in line, or it can be used as an “Instruction Sign” and/or “Exit Sign” within a rollover carwash. The BS820 has many other uses such as “Entrance Signage" for an indoor carwash or just for a message center promoting the wash.

     

 Product Options
Code Option Description LTT8xx BT8xx BT9xx
-B Burglar alarm, impact sensor activated, beeps horn, ALARM displayed. Ö Ö Ö
-D Disable coin acceptor power for Out Of Service condition. Ö   Ö
-H Horn output for last minute beep, coin deposit beep, burglar alarm. Ö Ö Ö
-P Output protected from short circuit, automatic reset, SHORT displayed. Ö   Ö
-S Service data input option for use with CP3000. Ö Ö Ö
-T Latch time, wash as long as you want, reset when customer leaves. Ö   Ö
-F High brightness LED modules. Ö Ö Ö
-U Ultrabright red LED modules highly visible in direct sunlight.   Ö Ö
-G Ultrabright green LED modules highly visible in direct sunlight.   Ö Ö
-Y Ultrabright yellow LED modules highly visible in direct sunlight.   Ö Ö
 
 Product Accessories
  UNDER CONSTRUCTION........ see price list