X-Mark facets form a code in the surface of the token and are read
by X-Mark Xeptors to verify that the token is not just some melted
lead slug or punched piece of metal having diameter and alloy the
same as your token. If you want to eliminate slugs and crossplay
then you need X-Mark tokens and Xeptors.
X-60’s unique small geometry metal sensor coils measure both the
edge and center metal signature of the coin. The large, oblong and
deep-seated coils of other coin acceptors haven’t a real chance of
separating the signatures of edge and center alloys. Your valuable
bi-metal tokens deserve X-60 security treatment.
Precision optical diameter measurement with 0.007” resolution allows
the X-60 to eliminate the shaved coin problem that plagues simple
comparators and results in tricking hopper counters to overpay
customers. The solution: Just Don’t Accept Shaved Coins!
best customer can insert 5 to 7 large tokens per second. With Triple
Track Technology, the X-60 can measure, track, and properly credit
as many a 3 coins simultaneously traveling through the coin chute,
resulting in an unrivaled speed of over 10 coins per second. You
can't beat that!
Credit Optics Logic
IDX Xeptors optionally can be ordered with built-in credit optics.
The X-60’s sophisticated sequencing and timing logic combine
information from the numerous internal sensors to provide a complete
defense against stringing, soda straw tricks, and taped coins, based
on coin speed, direction and path.
Personality plugs adapt a single Xeptor model to any of many
industry standard electrical interfaces. More than a dozen
Personality Plug modules are available to ensure compatibility with
machines requiring any of 24VAC, 24VDC, 12VDC, Tilt, Credit, Sense,
and Inhibit signals… or custom.
Learn’n RunTM Or Download
Manually program the X-60 by pressing buttons and dropping coins, or
use an X-60 Coin Selector to download coin signatures
at the touch of the button. In addition to being faster, the Coin
Selector ensures that there is no employee coin programming error
when dozens of units must be programmed.
Xeptors can be manually programmed in the field for the coins they
are to accept. When programmed with the X-Key attached, the Xeptor
thereafter secures itself so that manual programming can no longer
be done unless the X-Key is again attached. This provides access
digging bent coins out of comparators with screwdrivers that just
rip them up. Even those half-flap acceptors require the screwdriver
treatment now and then. Only Xeptors are deigned to fully open on
Xeptor never sleeps on the job. When no coins are coming through, he
is busy re-calibrating the nine optical sensors and two inductive
sensors. He also tracks long term coin data averages so acceptance
windows for coins stay centered and perfectly tuned.