(870) 862-2051 / (800) 643-1109 sales@idxinc.com



High Performance CarWash Control Components


The SCADAWash controller is designed to gather data from your wash equipment, vendors and changers when connected via a WT-RAM wireless module.



Wickets NTS can be integrated into most every car wash, vending, and laundry piece of equipment with one of our wireless or wired interfaces. IDX’s 3 way combo credit card reader- mag strip, contactless chip NFC and contact chip EMV, offers your customers choices of how they pay for services:  mag strip credit card, NFC chip for cellphones using E-wallets and RFID Gift / Fleet / Store cards as well as the new EMV contact chip cards.


WICKETS™ Cashless Stored Value Payment System

The Wickets System for the carwash market utilizes modern RFID (radio frequency identification) cards that are capable of securely storing value right on the card. It is the same as having bills in your wallet or change in your pocket.


Displays & Display Timers

IDX manufactures the Giga Timer, Little Two Timer, the Big Time, and the Jumbo Time series of Display-Timers. Each of these may be configured as a display only for tracking another timer, or may have the timer output in it as well. The Little Two Timer mounts inside the meter box while the Big Time and Jumbo Time are mounted externally on the wall.


Non-Display Timers & Controls

IDX timers are built with the most durable high power outputs in the industry – bar none! The AT411 series of vacuum timers include such options as X-Tra Time, Last Coin Alert, Anti Freeze Timer, Two-Timer and a 24VAC built-in transformer to power a coin acceptor. The MX-8 series of high pressure delay timers saves wear and tear, while the MX-48 Foaminator series is designed to control solenoids for multiple colors of soap foam.


X-MARK® TOKENS … Stop the Crossplay

X-Mark is an optical code minted into the surface of a token. X-Mark eliminates slugging and  unwanted crossplay of tokens from other nearby establishments. Because IDX owns this patented technology, only IDX can offer truly Site Secure Tokens and guarantee there will never be a token like yours within 100 miles of your carwash. Can your token do that?


Card Display™ … The New Standard for Card Acceptor Interfaces

CARD-DISPLAY is a standard protocol and interface designed to facilitate the interoperability of credit and debit card systems with display-timer products to convey payment, message, and status data back and forth between the two units.


Coin Acceptors … Know the Difference!

Does your coin acceptor Know The Difference between the coins and tokens you want to accept and those you don’t? Whether you want to accept just the 25¢ coin, multiple coins, multi-national coins, coins and tokens, IDX has the right coin acceptor to do the job.


Bill Acceptors … One That Works Outdoors!

IDX offers Coinco’s New Mag Pro bill acceptor featuring increased acceptance rates, longer life and greater reliability. The high acceptance of valid bills including wet, torn, and damaged bills increases up-time. Protects from losses and damage due to “pull-back” and salting. Easy-cleaning, snap-in modules, for on-the-spot service.


ZOLAR … The Ultimate in Freeze Control!

Zolar Z440 cycles the weep water for your high pressure wands, controls your slab heater system, controls blow down for your low pressure/foam products, controls exterior lighting and even turns on your office air conditioner or other equipment based on time.


Selector Switches … Electronic and Mechanical

IDX offers the toughest corrosion resistant 8 and 10 position mechanical rotary selector switches available today. Or, step up to the 10 position electronic selector switch with beeper, lighted button indicators, short circuit proof solid state outputs, secret code for enabling bay wash-down, and configurable output for the high pressure pump.


Meter Boxes … Serviceable Hinged Door Boxes!

IDX meter boxes are widely known for ease of service with their drop-down hinged removable doors. They are pre-wired, use snubber terminal blocks, come in a variety of sizes and safe options, and may be configured for just about any combination of coin acceptor, display, bill valuator and selector switch you may want. The door’s graphic overlay top surface is heavy duty polycarbonate, is easily field customized, and is easily field replaced if damaged.


Menu Signs … BIG BOLD GRAPHICS !!!

Bay Menu Signs are 24″ by 36″ size thick polycarbonate sheets in stainless steel frames. Spot labels match those on meter box rotary switch and may be put on in any order in the field. All graphics are printed on or attached to the back surface of the sign for protection. Available with no backlighting, with backlit spots that track meter box rotary switch, and with optional position for mounting Big Time as shown in the photo on the left.


Spike Snubber Terminals … Bye Bye Electrical Interference

High current solenoids, contactors and other heavy duty electrical equipment in your carwash produce upwards of 10kV voltage spikes and showering arcs on your 24VAC. When these voltage spikes crawl around your wiring, they can interfere with your electronic timers, displays and coin acceptors that use the same 24VAC power resulting in “strange behavior.” Snubber terminal blocks clamp and absorb these spikes so your equipment behaves as expected. IDX puts these snubber terminals in all meter boxes shipped. If you experience “strange behavior” in some of your bays, you probably need to add snubber terminals.


Other Accessories … The Important Details!

IDX provides nearly a bazillion other important little accessories to look after the details of making your carwash function at its best. They include; transformers, locks, specialty fuses, beepers, coin counters, strobes, labels and decals, snap-in acceptor face plates, indicator lights, crimping tools, hour meters, and the list goes on an on.