Industrial Application Controllers
Chase Controls Corp. offers various industrial controllers for use depending on your specific application.
Whether you’re looking for pump control, valve control, tank RTU, or water plant filter control, Chase Controls is your answer.
CC – 2000 Controller
Click to download a .PDF brochure for the CC – 2000 Controller
The CC – 2000 is a dedicated application controller with all the power of a custom programmed PLC, in a user-friendly configurable platform. Chase Controls dedicated controllers, are designed and preprogrammed with multiple water and wastewater applications, ranging from simple pump / wet well control to complex water plant filter control, all in a single compact footprint.
This 32-bit controller offers the power and performance required for real-time communications, with short program scan times, as well as a wide range of digital and analog interface options. The controllers industry standard Modbus RTU communications, can be configured as a Modbus RTU Master or Slave, which simplifies integration with any SCADA software, HMI touch screen, and other intelligent instrumentation.
The CC – 2000 provides flexible communication with 2 serial RS232/RS485 ports and for applications using an Ethernet LAN or WAN, a optional 10/100BaseT Ethernet port is available. For those challenging remote applications, the CC – 2000 supports connection over serial radio, Ethernet radio, cellular radio, and phone lines.
Features:
- 32 Bit RISC Processor
- 1 – RS232 Port
- 1 – RS232/RS485 Port
- Optional 10/100Base T Port
- Modbus RTU Master/Slave Communications
- Expandable I/O
- Preprogrammed Applications Such As:
- Pump Control
- VFD Pump Control
- Tank RTU
- Valve Control
- Water Plant Filter Control
- RTU Functionality for all applications
- Applications Configurable via User-Friendly Interface
- Integrated Hardware Watchdog Timer
Specifications:
Processor | CPU 32 Bit microcontroller, integrated watchdog timer |
Memory | 8 MB SRAM, 16 MB Flash ROM |
Non Volatile RAM | CMOS RAM w/ lithium battery retains contents for 2 years with no power |
Digital IN | CC – 2000 CC – 2000-D |
20-52 20-52 |
90-120VAC, 47-63 Hz 12-24VDC, Sink or Source |
Digital OUT | CC – 2000 CC – 2000-D |
16-48 16-48 |
6-240VAC / 6-27VDC, 2Amp 6-240VAC / 6-27VDC, 2Amp |
Analog IN | CC – 2000 / -D | 4-32 | 0-20ma, 4-20ma, 0-5V, 0-10V |
Analog OUT | CC – 2000 / -D | 4-32 | 0-20ma, 4-20ma, 0-10V |
Integrated Ports | 1ea. – RS232 Serial, 6 Pin RJ-12, 1ea. – RS232/RS485 15 Pin DB15HD |
Baud Rate | Selectable 300-38,400 baud |
Serial Protocols | Modbus RTU (Master / Slave) |
Optional | 10/100BaseT Ethernet, RJ45 |
Ethernet Protocols | Modbus TCP/IP |
Terminals | Removable Terminal Blocks, 16-22AWG, 15Amp Contacts |
Dimensions | (9.09in Wide) x (5.0in High) x (2.56in Deep) |
Temperature | -4° F to 158° F |
Humidity | 5% RH to 95% RH, non-condensing |
Vibration | MIL STD 810C, Method 514.2 |
Shock | MIL STD 810C, Method 516.2 |
Power | CC – 2000 95-240VAC CC – 2000-D 12-24VDC |
CC – 3000 Controller
Click to download a .PDF brochure for the CC – 3000 Controller
PLC’s provide a great solution for many applications, but when your application goes beyond straightforward ladder logic controlling simple I/O, Chase Controls CC-3000 Industrial controller is the smarter way to go. The CC-3000 is a controller with high performance Intel Dual Core CPU. Built-in Windows Embedded operating system makes the CC-3000 a ready application platform to shorten development time. Connecting with Chase Controls Remote IO I/O modules, the CC-3000 can become a complete control system.
The CC-3000 utilizes ISaGRAf the industry standard IEC6113-3 automation software. ISaGRAf provides a user-friendly, flexible environment for developing, debugging and downloading CC-3000 controller logic code; and provides local and remote access to your process by utilizing Intranet and Internet technologies. The IEC 61131-3 software package includes the five main languages: Sequential Function Chart (SFC), Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), and Structured Text (ST). In addition to these languages a sixth, called Flow Chart (FC) is included. This sixth language is graphics-based and used to describe sequential operations in an application.
Features:
- Intel 64 Bit 2-Core 1.6GHz Processor
- 2 – RS232/RS485 Port (Standard), Expandable to 4
- Standard 10/100/1000 Mb/s Ethernet Port
- Modbus RTU Master/Slave Communications
- Chase Controls CNet Protocol Communications
- OPC Data Communications
- Expands IO by connecting RIO Modules
- Field Programmable Logic via Industry Standard
IEC-61131-3 ISaGRAf v5.2 - Applications Configurable via User-Friendly GUI
- Integrated Hardware Watchdog Timer
- Windows Embedded Industrial OS
Specifications:
Processor | CPU 64 Bit dual-core microcontroller, integrated watchdog timer |
Memory | 2 GB SRAM Standard, 16 GB SRAM Maximum |
Non Volatile RAM | 32 GB Solid State SATA Storage Drive |
Digital IN | Limited By Protocol Only |
Digital OUT | Limited By Protocol Only |
Analog IN | Limited By Protocol Only |
Analog OUT | Limited By Protocol Only |
Integrated Ports | 2ea. – RS232/RS485 Serial, 5-USB, Analog VGA, 2 SATA, 10/100/1000 Mbs TCP/IP |
Baud Rate | Selectable 300-230,000 baud |
Serial Protocols | Modbus RTU (Master / Slave), Chase CNet, DNP, AB DF-1, others on request |
Ethernet Protocols | Modbus TCP/IP, AB TCP/IP, DNP, Chase CNet, others on request |
Terminals | Removable Terminal Blocks, 16-22AWG, 15Amp Contacts |
Dimensions | (7.5 in Wide) x (8.25 in High) x (2.50 in Deep) |
Temperature | 10° F to 158° F |
Humidity | 5% RH to 95% RH, non-condensing |
Vibration | MIL STD 810C, Method 514.2 |
Shock | MIL STD 810C, Method 516.2 |
Power | 120VAC / 18VDC |
CC – 4000 Controller
Click to download a .PDF brochure for the CC – 4000 Controller
The CC-4000 Series is a family of Industrial / SCADA specific programmable controllers, that combine the programmability of a Programmable Logic Controller (PLC), the communication capabilities and extended operating temperature of an advanced Remote Terminal Unit (RTU).
The CC-4000 utilizes ISaGRAf the industry standard IEC6113-3 automation software. It is fully programmable and compatible with all five IEC-61131 standard languages, Sequential Function Chart (SFC), Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), and Flow Chart (FC). as well as C/C++ programming. If you need to implement custom control strategies, protocols or logging routines you have the full power of a high-end programmable controller. You can create your own custom function blocks using the richly supplied library including PID control, linear / non-linear scaling, chemical pacing and pump control, just to name a few.
In addition to these languages ChaseNet Commander (CNC) is included. CNC is a “point-n-click” graphics-based easy to use interface to configure standard controller operations, such data polling, communication addressing, data tag creation / management, IO expansion, analog scaling, embedded digital totalizers, and others. So when you need to develop custom functionality, you can use the programming language you want for any application and toggle back and forth using multiple languages all within a single project.
Features:
- Intel 64 Bit 2-Core 1.8GHz Processor
- RS232/RS485 Port Full UART
- 4 – USB 2.0 Hi-Speed 480Mbps Ports
- Dual 10/100/1000 Mb/s Ethernet Ports
- 1 GB RAM, 32 GB Internal Solid State Storage
- Modbus RTU Master/Slave Communications
- Chase Controls CNet Protocol Communications
- Embedded OPC Communications Data Server
- Expandable IO Connections to Several Thousand Chase RIO Points
- Field Programmable Logic via Industry Standard IEC-61131-3 ISaGRAf v5.2
- Multiple PID Loop Control
- 32 Bit Integer / 64 Bit Floating Point Math Capability
- Automatic File Transfer / Exchange with Host Computer or Remote HMI Computer
- Mini-SD Card For Removable Data Storage and Program Update
- Point And Click, “ChaseNet Commander” Configuration / SCADA Polling Software
- Integrated Hardware Watchdog Timer
- DVI Display Port 1920 x 1200 Maximum Resolution
- Windows Embedded Industrial OS
- Optional Internal Wireless LAN 802.11 b/g Communications
- Optional Integrated Web Server HMI
Specifications:
Processor | CPU 64 Bit dual-core microcontroller, integrated watchdog timer |
Memory | 1 GB SRAM Standard, 16 GB SRAM Maximum |
Non Volatile RAM | 32 GB Solid State SATA Storage Drive |
Digital IN | Limited By Protocol Only |
Digital OUT | Limited By Protocol Only |
Analog IN | Limited By Protocol Only |
Analog OUT | Limited By Protocol Only |
Integrated Ports | RS232/RS485 Serial, 4-USB, DVI Video, Dual 10/100/1000 Mbs TCP/IP |
Baud Rate | Selectable 300-230,000 baud |
Serial Protocols | Modbus RTU (Master / Slave), ChaseNet, DNP, AB DF-1, others on request |
Ethernet Protocols | Modbus TCP, Modbus UDP, AB TCP, DNP, ChaseNet TCP, others on request |
Dimensions | (4.5 in Wide) x (4.0 in High) x (1.10 in Deep) |
Temperature | 10° F to 158° F |
Humidity | 5% RH to 95% RH, non-condensing |
Vibration | MIL STD 810C, Method 514.2 |
Shock | MIL STD 810C, Method 516.2 |